Step One Removing the Radiator

Previous: 1996-1998 Jeep Wrangler TJ - Slide Control Head

Next: Install the Compressorr


  1. REMOVE THE POSITIVE AND NEGATIVE BATTERY CABLES and REMOVE THE BATTERY FROM THE VEHICLE Drain the radiator
  2. Remove the upper and lower radiator hose
  3. Remove the overflow tank and power steering reservoir, located on the fan shroud
  4. Remove the four bolts that mount the shroud to the radiator, slide the shroud back to the motor, REMEMBER TO SLIDE THE SHROUD BACK OVER THE FAN PRIOR TO INSTALLING THE RADIATOR
  5. Remove the four upper bolts from the radiator core support, loosen the lower two bolts
  6. Slide the radiator up and out

Previous: 1996-1998 Jeep Wrangler TJ - Slide Control Head

Next: Install the Compressorr