1996-1998 Jeep Wrangler TJ - Slide Control Head

IMPORTANT INFORMATION

After 1994 every vehicle was designed for R134a refrigerant. The Jeep kit you are about to install is not any different. This is a brand new a/c kit that is capable of a vent temperature of 39-47 degrees. The kit is not designed for sealer, dye, or Freon substitutes. If these substances are used we are not responsible for the performance of the a/c system.

This kit was created with the customer in mind. It is the simplest kit on the market to install, and it can be done without any special tools. The kit will fit into the Jeep just as the factory designed it too. Follow the directions and you will have cold air conditioning in less then a day. Before beginning the installation please read the directions provided, and view the enclosed CD to get familiar with the kit and installation process. Before beginning the installation go through the checklist on the following page. If any parts are not included contact us immediately.

We would like to thank you again for your business, and we would like to assure you that we are here if you need technical assistance.

SINCERELY THE STAFF OF
NOSTALGIC AIR PARTS, Inc.
JEEPAIR.COM

CheckList

COMPRESSOR W/ OIL
EVAPORATOR W/ TRAY AND FOAM
CONDENSER
ACCUMULATOR DRIER
LIQUID LINE
HOSE MANIFOLD
BINARY SAFETY SWITCH
CYCLING SWITCH
RELAY
20 AMP ATM FUSE
BELT
FOUR M-8 1.25 X 110MM BOLTS W/ WASHERS
ONE COMPRESSOR MANIFOLD BOLT
A/C CONTROL HEAD FACE PLATE
ACCUMULATOR STRAP
ACCUMULATOR SUPPORT BRACKET
TWO 5/16 J-BOLTS
FOUR 5/16 X 1" BOLTS WITH WASHERS
TWO 5/16 LOCK WASHER
FRESH AIR DOOR
VACUUM ACTUATOR
VACUUM TUBE WITH COUPLING
TIE STRAP
DIRECTIONAL CD

Next: Removing the Radiator