Tube-O Suction & Discharge Fittings with R-134a Ports

Tube-O suction and discharge fittings for R-134a refrigerant.  The suction fittiing has 7/8"-14 threads for the suction hose, and 1-14 thread for the compressor fitting.  The fitting also has a low side 14mm charge port.   The discharge fitting has 3/4"-16 threads for the discharge hose, and 1-14 thread for the compressor fitting.  The fitting also has a 16 mm charge port.  Please note that if your compressor has the same size fittings on the suction and discharge it is tube-o.  See the pictures for samples.  If your compressor has two fittings that are two different sizes you will need these fittings.

The fitting is made of steel and uses orings on both connections.  This fitting is common on York and Sanden comrpessors.