Heat & AC System Cj Series Kit 4.2 Liter Engine

Complete air conditioning and heating system for Jeep CJs with a 4.2 liter inline six cylinder engine with V-belts. The 4.2 Liter six cylinder was used on CJ's and Wranglers from 1980-1990, this bracket will fit the 258 or the 4.2 liter in the CJ's.  This is a complete air conditioning kit that will add a/c and heat to a CJ.  If your CJ has a faulty heater, or no heater this is the kit to replace all the old parts under the dash.  The kit requires the removal of the entire heating system that is behind the dash.  The kit is designed to work with R-134a refrigerant.  Defrost can be added to the kit by purchasing the defrost upgrade.  The defrost upgrade is a difuser we add to the evaporator / heating unit thats allows the duct hose to run to the original defrost outlets.  This kit will NOT work on a 4.2 liter engine with a serpentine belt. The kit includes:

Brand new compressor with oil, and clutch assembly
Parallel flow condenser
Oring drier
Compressor bracket with bolt kit, belt, pulleys, and directions
High low pressure switch
Evaporator unit with heater, mounting hardware, controls, heater control valve, and expansion valve
A/C hoses 
All necessary hardware for installation
Directions

The a/c  and heater system we offer is designed by Nostalgic Air Parts and is manufactured in Tampa Florida.  The kit is very simple to install, see directions.  The kit can be installed in one day, and includes all the necessary parts except the refrigerant to charge it, and the heater hoses.

This a/c system is the most complete available in the aftermarket, and is guaranteed to be the highest quality.  Jeepair is a division of Nostalgic Air Parts, inc.  Nostalgic Air Parts is an a/c manufacturer, importer, wholesaler, retailer.  We repair vehicles, rebuild compressors, manufacture a/c systems & hoses, and resell to many other companies.  We are the source for all Jeep a/c parts and systems.

*Free ground shipping on this a/c system in the lower 48 States.