Heat And AC System Cj Series Jeep 258 Engine

Complete air conditioning and heating system for a Jeep CJ with a 258 cubic inch displacement six cylinder engine. The 258 cid six cylinder was used on CJ's during the 1970's and early 1980s, this bracket will fit the 258 or the 4.2 liter in the CJ's.  This is a complete air conditioning kit that will add a/c and heat to a CJ.  If your CJ has a faulty heater, or no heater this is the kit to replace all the old parts under the dash.  The kit requires the removal of the entire heating system that is behind the dash.  The kit is designed to work with R-134a refrigerant.  Defrost can be added to the kit by purchasing the defrost upgrade.  The defrost upgrade is a difuser we add to the evaporator / heating unit thats allows the duct hose to run to the original defrost outlets.  The kit includes:

Brand new compressor with oil, and clutch assembly
Parallel flow condenser
Oring drier
Compressor bracket with bolt kit, belt, pulleys, and directions
High low pressure switch
Evaporator unit with heater, mounting hardware, controls, heater control valve, and expansion valve
A/C hoses 
All necessary hardware for installation
Directions

The a/c  and heater system we offer is designed by Nostalgic Air Parts and is manufactured in Tampa Florida.  The kit is very simple to install, see directions.  The kit can be installed in one day, and includes all the necessary parts except the refrigerant to charge it, and the heater hoses.

This a/c system is the most complete available in the aftermarket, and is guaranteed to be the highest quality.  Jeepair is a division of Nostalgic Air Parts, inc.  Nostalgic Air Parts is an a/c manufacturer, importer, wholesaler, retailer.  We repair vehicles, rebuild compressors, manufacture a/c systems & hoses, and resell to many other companies.  We are the source for all Jeep a/c parts and systems.

*Free ground shipping on this a/c system in the lower 48 States.