# 8 & # 10 Suction & Discharge w/ R-134a Ports

O-ring suction and discharge fittings for R-134a refrigerant.  The suction fittiing has 7/8"-14 threads for the suction hose and compressor fitting.  The fitting also has a low side 13mm charge port.   The discharge fitting has 3/4"-16 threads for the discharge hose and for the compressor fitting.  The fitting also has a 16 mm charge port.  Please note that if your compressor has the same size fittings on the suction and discharge it is tube-o and you will need these fittings.  See the pictures for samples.  If your compressor has two fittings that are two different sizes these are correct for your application.

The fitting is made of steel and uses orings on both connections.  This fitting is common on Sanden comrpessors.